Aaeon PFM-CVS Rev.A Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Aaeon PFM-CVS Rev.A. AAEON PFM-CVS Rev.A User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 107
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
PC/104 Module PFM-CVS
PFM-CVS
Intel
®
Atom™ N2600 Processor
DDR3 1066 SODIMM
18-bit Single Channel LVDS LCD
4 USB2.0, 4 COM, 1 SATA, 1 mSATA
1 Gigabit Ethernet, PC/104
+
Mini Card (Optional)
PFM-CVS Manual Rev. A 2nd Ed.
December 2012
Zobrazit stránku 0
1 2 3 4 5 6 ... 106 107

Shrnutí obsahu

Strany 1 - PFM-CVS

PC/104 Module PFM-CVS PFM-CVS Intel® Atom™ N2600 Processor DDR3 1066 SODIMM 18-bit Single Channel LVDS LCD 4 USB2.0, 4 COM, 1 SATA, 1 mSATA 1 G

Strany 2 - Copyright Notice

PC/104 Module PFM-CVS 1.2 Features  Fanless Intel® Atom™ N2600 Dual Core 1.6 GHz Processor  Intel® Atom™ N2600 + NM10  204-pin DDR3 1066 MHz

Strany 3 - Acknowledgments

PC/104 Module PFM-CVS Appendix C Mating Connector C - 3 COM2 COM2 RS232/422/485 Connector CATCH H752-09 CATCH 1701090150COM3 COM3 RS232 Conn

Strany 4 - Packing List

PC/104 Module PFM-CVS Appendix D Electrical Specifications for I/O Ports D-1 Electrical Specifications A ppendixDfor I/O Ports

Strany 5 - Contents

PC/104 Module PFM-CVS Appendix D Electrical Specifications for I/O Ports D-2 D.1 Electrical Specifications for I/O Ports I/O Reference Signal Na

Strany 6 - Chapter 3 AMI BIOS Setup

PC/104 Module PFM-CVS Appendix D Electrical Specifications for I/O Ports D-3 D.2 DIO Programming PFM-CVS utilize

Strany 7 - Appendix C Mating Connector

PC/104 Module PFM-CVS Appendix D Electrical Specifications for I/O Ports D-4 D.3 Digital I/O Register GPIO Device Configuration Register (LDN 0x06

Strany 8

PC/104 Module PFM-CVS Appendix D Electrical Specifications for I/O Ports D-5 91 GPIO6 Output Data Register 92

Strany 9

PC/104 Module PFM-CVS Appendix D Electrical Specifications for I/O Ports D-6 D.4 Digital I/O Sample Program Main(){ aaeonSuperIOOpen(); f81866S

Strany 10 - PC/104 Module PFM-CVS

PC/104 Module PFM-CVS Appendix D Electrical Specifications for I/O Ports D-7 } Else(Read Digital Input?){ // Re

Strany 11

PC/104 Module PFM-CVS 1.3 Specifications System  Form Factor PC/104  Processor Intel® Atom™ N2600 1.6 GHz processor  Syste

Strany 12

PC/104 Module PFM-CVS  Operating Temperature 32ºF ~ 140ºF (0ºC ~ 60ºC); -4ºF ~ 158ºF (-20ºC ~ 70ºC) for WiTAS1  Storage Temperature

Strany 13

PC/104 Module PFM-CVS Chapter 1 General Information 1- 6 Limitation Notice on ISA Interface Support According to the information from Intel for A

Strany 14 - Chapter

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-1 Quick Installation Chapter 2Guide

Strany 15

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-2 2.1 Safety Precautions Always completely disconnect the power cord from your board w

Strany 16

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-3 2.2 Location of Connectors and Jumpers Component Side

Strany 17

PC/104 Module PFM-CVS Solder Side Chapter 2 Quick Installation Guide 2-4

Strany 18

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-5 2.3 Mechanical Drawing Component Side

Strany 19 - Solder Side

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-6 Solder Side

Strany 20 - 2.4 List of Jumpers

PC/104 Module PFM-CVS i Copyright Notice This document is copyrighted, 2012. All rights are reserved. The original manufacturer reserves the r

Strany 21

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-7 2.4 List of Jumpers The board has a number of jumpers

Strany 22 - DIMM1 DDR3 SODIMM Connector

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-8 2.5 List of Connectors The board has a number of connectors that allow you to configu

Strany 23

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-9 FAN1 FAN Connector(Reserved) LAN1 LAN Connector DIMM1 D

Strany 24 - +5V +3.3V

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-10 2.6 Setting Jumpers You configure your card to match the needs of your application by

Strany 25 - +12V Ring +5V

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-11 2.7 LVDS Voltage Selection (JP2) 123 123 +5V

Strany 26 - -12V -5V GND

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-12 2.9 COM2 +5V/Ring/+12V Selection (JP6) 123456 123456 123456 +12V Ring +5V

Strany 27

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-13 2.12 PC/104 -5V/-12V Voltage Selection (JP11) Reserved

Strany 28

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-14 2.14 Internal LVDS Connector (CN3) Pin Pin Name Signal Type Signal Level 1 LVDS_B

Strany 29

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-15 16 GND GND 17 LVDS_TX1 OUT 18 LVDS_DDCDAT I/O +

Strany 30

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-16 2 POWRR BUTTON# IN 3 External Buzzer(+) OUT 4 External Buzzer(-) OUT 5 HDD LE

Strany 31

PC/104 Module PFM-CVS ii Acknowledgments All other products’ name or trademarks are properties of their respective owners.  Intel® and Atom

Strany 32

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-17 2.20 Digital I/O Connector (CN12) Note: The DIO fu

Strany 33

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-18 Pin Pin Name Signal Type Signal Level 1 WAKE# I/O 2 +3V3_MC PWR +3.3V 3 Reserve

Strany 34

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-19 24 +3V3_MC PWR +3.3V 25 PCIE_RXP1 DIFF 26 GND GND

Strany 35

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-20 48 +1.5V PWR +1.5V 49 Reserved 50 GND GND 51 Reserved 52 +3V3_MC PWR +3.

Strany 36 - 2.24 CRT Connector (VGA1)

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-21 13 PCIE_MC_CKLP OUT 14 Reserved 15 GND GND 16

Strany 37

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-22 37 GND GND 38 USBP4+ DIFF 39 +3V3_MC PWR +3.3V 40 GND GND 41 +3V3_MC PWR

Strany 38

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-23 2.23 SATA Connector (SATA1) Pin Pin Name Signal Ty

Strany 39

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-24 3 GND GND 4 SCL I/O +5V 5 SDA I/O +5V 6 GND GND 7 BLUE OUT 8 GND GND 9 G

Strany 40

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-25 7 DTR1 OUT ±9V 8 RI1 IN 9 GND GND 2.26 COM2 RS-2

Strany 41 - 2.30 USB2.0 Connector (USB2)

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-26 2 N.C 3 RX+ IN 4 N.C 5 TX+ OUT ±5V 6 N.C 7 RX- IN 8 +5V/+12V PWR +

Strany 42 - 2.32 USB2.0 Connector (USB4)

PC/104 Module PFM-CVS iii Packing List Before you begin installing your card, please make sure that the following materials have been shipped:

Strany 43

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-27 Pin Pin Name Signal Type Signal Level 1 DCD3 IN 2

Strany 44 - 10 LAN1_RX2- DIFF

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-28 8 RI4 IN 9 GND GND 2.29 USB2.0 Connector (USB1) Pin Pin Name Signal Type Si

Strany 45

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-29 2.31 USB2.0 Connector (USB3) Pin Pin Name Signal Typ

Strany 46 - Chapter

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-30 2.33 FAN Connector (FAN1) Reserved Pin Pin Name Signal Type Signal Level 1 GND GND

Strany 47

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-31 10 LAN1_RX2- DIFF 2.35 DDR3 SODIMM Connector (DIMM1)

Strany 48

PC/104 Module PFM-CVS Chapter 2 Quick Installation Guide 2-32 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter B

Strany 49

PC/104 Module PFM-CVS Chapter 3 AMI BIOS Setup 3-1 AMI Chapter 3BIOS Setup

Strany 50 - Setup submenu: Advanced

PC/104 Module PFM-CVS 3.1 System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error durin

Strany 51 - Options summary :

PC/104 Module PFM-CVS 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This

Strany 52 - CPU Configuration

PC/104 Module PFM-CVS Setup Menu Setup submenu: Main Chapter 3 AMI BIOS Setup 3-4

Strany 53 - IDE Configuration (IDE)

PC/104 Module PFM-CVS iv Contents Chapter 1 General Information 1.1 Introduction...

Strany 54 - IDE Configuration (AHCI)

PC/104 Module PFM-CVS Setup submenu: Advanced Chapter 3 AMI BIOS Setup 3-5

Strany 55 - USB Configuration

PC/104 Module PFM-CVS ACPI Settings Options summary : S3 (Suspend to RAM) Optimal Default, Failsafe DefaultSuspend mode Select the ACPI state us

Strany 56

PC/104 Module PFM-CVS CPU Configuration Options summary : Disabled Hyper-Threading Enabled Optimal Default, Failsafe Default En/Disable CPU Hyper

Strany 57 - Serial Port

PC/104 Module PFM-CVS IDE Configuration (IDE) Chapter 3 AMI BIOS Setup 3-8

Strany 58

PC/104 Module PFM-CVS IDE Configuration (AHCI) Options summary : Disabled SATA Controllers Enabled Default En/Disable SATA Controller. IDE Default

Strany 59

PC/104 Module PFM-CVS USB Configuration Options summary : Enabled Optimal Default, Failsafe Default Disabled Legacy USB Support Auto Enables B

Strany 60

PC/104 Module PFM-CVS F81866 Super IO Configuration Chapter 3 AMI BIOS Setup 3-11

Strany 61 - F81866 H/W Monitor

PC/104 Module PFM-CVS Serial Port ConfigurationChapter 3 AMI BIOS Setup 3-12

Strany 62 - Digital IO

PC/104 Module PFM-CVS Chapter 3 AMI BIOS Setup 3-13

Strany 63 - Setup submenu: Chipset

PC/104 Module PFM-CVS Chapter 3 AMI BIOS Setup 3-14

Strany 64 - Host Bridge

PC/104 Module PFM-CVS v 2.16 PCI-104 Connector (CN6)... 2-15 2.17 Front Panel Connector (CN7) ...

Strany 65 - Graphics Configuration

PC/104 Module PFM-CVS Options summary : Disabled Serial Port Enabled Default Allows BIOS to En/Disable correspond serial port. Auto Default IO=3F8h

Strany 66

PC/104 Module PFM-CVS F81866 H/W Monitor Chapter 3 AMI BIOS Setup 3-16

Strany 67 - South Bridge

PC/104 Module PFM-CVS Digital IO Options summary : Input Default DIO_P#1~4 Output Allows BIOS to select input/output function to corresponding DIO

Strany 68 - Setup submenu: Boot

PC/104 Module PFM-CVS Setup submenu: Chipset Chapter 3 AMI BIOS Setup 3-18

Strany 69 - BBS Priorities

PC/104 Module PFM-CVS Host Bridge Chapter 3 AMI BIOS Setup 3-19

Strany 70 - Security

PC/104 Module PFM-CVS Graphics Configuration Chapter 3 AMI BIOS Setup 3-20

Strany 71 - Removing the Password

PC/104 Module PFM-CVS Options summary : 128MB Fixed Graphics Memory Size 256MB Default Select the amount of system memory used by the Internal grap

Strany 72 - Setup submenu: Exit

PC/104 Module PFM-CVS South Bridge Options summary : ATX Type Default Power Mode AT Type Select Power Mode: ATX Type: Normal ACPI support AT Type

Strany 73

PC/104 Module PFM-CVS Setup submenu: Boot Options summary : Disabled Quiet Boot Enabled Default En/Disable showing boot logo. Disabled Default Lau

Strany 74

PC/104 Module PFM-CVS BBS Priorities Chapter 3 AMI BIOS Setup 3-24

Strany 75

PC/104 Module PFM-CVS vi Chapter 4 Driver Installation 4.1 Installation... 4

Strany 76

PC/104 Module PFM-CVS Security Change User/Supervisor Password You can install a Supervisor password, and if you install a supervisor password, you

Strany 77

PC/104 Module PFM-CVS Removing the Password Highlight this item and type in the current password. At the next dialog box press Enter to disable p

Strany 78

PC/104 Module PFM-CVS Chapter 3 AMI BIOS Setup 3-27 Setup submenu: Exit

Strany 79

PC/104 Module PFM-CVS Chapter 4 Driver Installation 4 - 1 Driver Chapter 4Installation

Strany 80

PC/104 Module PFM-CVS Chapter 4 Driver Installation 4 - 2 The PFM-CVS comes with a CD-ROM that contains all drivers and utilities that meet your nee

Strany 81

PC/104 Module PFM-CVS Chapter 4 Driver Installation 4 - 3 4.1 Installation: Insert the PFM-CVS CD-ROM into the CD-ROM Driv

Strany 82

PC/104 Module PFM-CVS Chapter 4 Driver Installation 4 - 4 Step 4 – Install Serial Port Driver (Optional) For Windows® XP 32-bit 1. Click on the

Strany 83

PC/104 Module PFM-CVS Chapter 4 Driver Installation 4 - 5 For Windows® 7 32-bit/ 64-bit 1. Modify the UAC (User Account Co

Strany 84 - Appendix

PC/104 Module PFM-CVS Chapter 4 Driver Installation 4 - 6 2. Restart the operating system.

Strany 85

PC/104 Module PFM-CVS Chapter 4 Driver Installation 4 - 7 3. Click on the STEP4 - Serial Port Driver (Optional) folder and

Strany 86

PC/104 Module PFM-CVS Chapter 1 General Information 1- 1 General Chapter 1Information

Strany 87

PC/104 Module PFM-CVS Chapter 4 Driver Installation 4 - 8 Step 5 – Install Rapid Storage Technology 1. Click on the Step5 - Rapid Storage Technol

Strany 88 - Main(){

PC/104 Module PFM-CVS Chapter 4 Driver Installation 4 - 9 Step 1: Copy the files below from “Driver CD” -> “Step6 - AHCI

Strany 89

PC/104 Module PFM-CVS Chapter 4 Driver Installation 4 - 10 Step 4: Choose “S” Step 5: Choose “Intel(R) NM10 Express Chipset”

Strany 90 - VoidaaeonSuperIOClose(){

PC/104 Module PFM-CVS Chapter 4 Driver Installation 4 - 11 Step 6: It will show the model number you select and then press “

Strany 91

PC/104 Module PFM-CVS Appendix A Programming the Watchdog Timer A-1 Programming the Appendix AWatchdog Timer

Strany 92 - B.1 I/O Address Map

PC/104 Module PFM-CVS Appendix A Programming the Watchdog Timer A-2 A.1 Programming PFM-CVS utilizes FINTEK 81866 chipset as its watchdog timer c

Strany 93

PC/104 Module PFM-CVS Appendix A Programming the Watchdog Timer A-3 There are three steps to complete the configuration setup: (1) Ent

Strany 94

PC/104 Module PFM-CVS Appendix A Programming the Watchdog Timer A-4 Watch Dog Timer 1, 2, 3 Control Register (Index=F5h,F6h,FAh Default=00h)

Strany 95 - B.3 IRQ Mapping Chart

PC/104 Module PFM-CVS Appendix A Programming the Watchdog Timer A-5 A.2 F81866 Watchdog Timer Initial Program Main(){aaeonSuperIOOp

Strany 96

PC/104 Module PFM-CVS Appendix A Programming the Watchdog Timer A-6 VoidaaeonWdtSetTimeoutCount(BYTEtTimeout){f81866SetLdn(0x07);f81866Wr

Strany 97 - B.4 DMA Channel Assignments

PC/104 Module PFM-CVS 1.1 Introduction AAEON Technology, a leading company in embedded boards manufacturing with a full range of PC/104 Modules, lau

Strany 98 - Appendix

PC/104 Module PFM-CVS Appendix A Programming the Watchdog Timer A-7 VoidaaeonSuperIOClose(){ aaeonioWritePortByte(F81866_INDEX,0xa

Strany 99

PC/104 Module PFM-CVS Appendix B I/O Information B-1 I/O Information Appendix B

Strany 100 - C - 3

PC/104 Module PFM-CVS Appendix B I/O Information B-2 B.1 I/O Address Map

Strany 101 - A ppendix

PC/104 Module PFM-CVS Appendix B I/O Information B-3

Strany 102

PC/104 Module PFM-CVS Appendix B I/O Information B-4 B.2 1st MB Memory Address Map

Strany 103 - PC/104 Module PFM-CVS

PC/104 Module PFM-CVS Appendix B I/O Information B-5 B.3 IRQ Mapping Chart

Strany 104

PC/104 Module PFM-CVS Appendix B I/O Information B-6

Strany 105

PC/104 Module PFM-CVS Appendix B I/O Information B-7 B.4 DMA Channel Assignments

Strany 106

PC/104 Module PFM-CVS  Appendix C Mating Connector C - 1 Appendix CMating Connector

Strany 107

PC/104 Module PFM-CVS Appendix C Mating Connector C - 2 C.1 List of Mating Connectors and Cables The table notes mating connectors and available cab

Komentáře k této Příručce

Žádné komentáře